NK Optik Otoflash G171-6 Curing Unit with Nitrogen Port By NK-Optik

SKU: 18864
NK Optik Otoflash G171-6 Curing Unit with Nitrogen Port By NK-Optik Intra Oral Scanner by NK Optik- Unique Dental Supply Inc.
NK Optik Otoflash G171-6 Curing Unit with Nitrogen Port By NK-Optik Intra Oral Scanner by NK Optik- Unique Dental Supply Inc.
NK Optik Otoflash G171-6 Curing Unit with Nitrogen Port By NK-Optik Intra Oral Scanner by NK Optik- Unique Dental Supply Inc.
NK Optik Otoflash G171-6 Curing Unit with Nitrogen Port By NK-Optik Intra Oral Scanner by NK Optik- Unique Dental Supply Inc.
NK Optik Otoflash G171-6 Curing Unit with Nitrogen Port By NK-Optik Intra Oral Scanner by NK Optik- Unique Dental Supply Inc.

NK Optik Otoflash G171-6 Curing Unit with Nitrogen Port By NK-Optik

SKU: 18864
Regular price $4,899.99
/

High-power flash-curing machine. Flash-curing device for rapid and
reliable curing of light-curable resins.

Nitrogen and Connecting Kit has to be bought separately

 

Connecting kit Otoflash G171 to N2

The G171 to N2 Connection Kit is a connection kit for connecting the N2 nitrogen cylinder to the G171 Otoflash post-curing machine. The Otoflash G171 post-curing unit is a motherboard controlled flash lamp used to cure the prints printed by the DLP and SLA devices. Please note that the Otoflash G171 must be prepared for the N2 and must have the connections for it.

Type: Connection set for Otoflash G171 to N2.
Contents: regulator + hoses

Compatible Resins:

KeyModel Ultra – 2000 flashes per side
KeyModel  – 4000 flashes per side
KeyOrthoModel  – 4000 flashes per side
KeyCast – 2000 flashes per side
KeyMask – 4000 flashes per side
KeyGuide  – 2000 flashes per side
KeyTray – 2000 flashes per side
KeySplint Soft  – 2000 flashes per side


Free Shipping on all orders over $150 in Ontario and Quebec. Free Shipping at the rest of the provinces on all orders over $300. (Excluding Extra Heavy items)

Learn more here

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Flash-curing device for light-curing

Flash-curing device for rapid and reliable curing of light curable resins

  • The Otoflash G171-6 is used for curing of light-curable resins through light induced photopolymerization. 
  • It is optimized for quick curing of medical grade 3D printed materials using Nitrogen. 
  • In the operating mode, two flash bulbs fitted at the bottom produce ten flashes per second. 

The Otoflash G171-6 has two flashbulbs that emit light into the polymerisation chamber from below. It is therefore especially suitable for application in otoplastics/hearing aids and in the production of jewellery. The device can be used for the photopolymerisation of all light-curable materials where the curing takes place at a wavelength of 280-580 nm.

Spectral range

Similarly, work pieces produced by means of new technologies such as 3D rapid manufacturing can be post-cured. The Otoflash G171-6 enables the production and processing of light curing materials of different consistencies and pigmentation, as well as repairs with corresponding materials and lacquering.

With its technical configuration, the Otoflash G171-6 enables short curing times: In the operating mode, two flash bulbs fitted at the bottom produce ten flashes per second. The respective light radiation at a wavelength of 280-580 nm is very intense. Compared to other methods this achieves a substantially better curing of the materials, resulting in very good physical characteristics and reduced residual monomer content (inhibition layer).

The Otoflash G171-6 is also deliverable with a protective gas appliance (r N2). This prevents any oxygen inhibition, surfaces are cured completely non-stick and there is no need to remove or wipe away the inhibition layer.

The Otoflash G171-6 has an integrated elapsed time meter, is simple to use and is extremely easy to maintain.

The Otoflash G171-6 are adjustable to different operational voltages (USA: 117 volt/60 Hz and Japan: 100 volt/60Hz).

TECHNICAL SPECIFICATIONS

Dimensions of polymerisation chamber: 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 w
Capacity: 4 BTE-aids or 6 ITE-aids
Rated voltage: 100, 117, 230 volt AC, adjustable by switch
Rated frequency: 50/60 Hz
Power input: 250 watt
Spectral distribution: 280-700 nm, maximum between 400 and 500 nm
Average flash power: 200 watt
Flash frequency: 10 flashes per second
Digital timer: adjustable from 1 to 9.999 flashes
Dimensions: 310 x 310 x 140 mm
Weight: 6 kg