AccuFab-L4D/L4K Frequently Asked Questions
The AccuFab-L4D/K’s high fidelity of print result brings extraordinary digital dentistry workflow from intraoral scanning to rapid 3D printing
Starting with the AccuFab-L4D/L4K
- Before Receiving
- User manual for Accufab-L4K/L4D
- AccuFab-L4D Unpacking
- AccuFab-L4D Installation
- AccuFab-L4D Manual Leveling
- AccuFab-L4D Tips on Support Adding
- AccuFab-L4D Operation
- AccuFab-L4D Post Processing
- AccuFab-L4D Resin Tank Cleaning
- AccuFab-L4D Operataion Videos-Download link
- AccuFab-L4D, discover the new 3D printer by Shining 3D
Setting up the AccuFab-L4D/L4K
Troubleshooting & Calibration of the AccuFab-L4D/L4K
Maintenance of the AccuFab-L4D/L4K
Video for Support
- AccuFab-L4D Basic Operation Webinar
- Dental Salon EP. 3 - The digital technology for aesthetics application
- Aoralscan 3 and AccuFab L4D - Dr. Troy Schmedding
- Introduction of AccuWare V3.1.7 - Update for AccuFab Printers
- Shining 3D's full digital solution for dentistry
- Dental Salon EP. 6 - Printing software Accuware 3.1.7 Update
- Dental Salon EP. 12 - Accuware 3.1.8 - Software update for AccuFab 3D printers
- Dental Salon EP. 15 - AccuWare one click printing
- Dental Salon EP. 16 - AccuDesign - An easy and useful Model Builder
- Digital Implantology - 10 keys to improve your digital workflow
FAQs
The L4D/K does not have any preheating settings but you can preheat the resin externally by placing a desktop heating unit near the resin or in the print chamber.
This issue is likely due to the temperature of the resin on first use.The temperature usually stabilizes as the printer is in use,since the internal components will heat up such as the light source and LCD screen.To avoid this issue on the first print,it may be worth placing a desktop heating unit near the resin or in the print chamber in the morning during the cold seasons.
