Otoflash G171-2 : Flash-curing device for light-curing By NK-Optik

SKU: 18863
Otoflash G171-2 : Flash-curing device for light-curing By NK-Optik Intra Oral Scanner by Shining 3D- Unique Dental Supply Inc.
Otoflash G171-2 : Flash-curing device for light-curing By NK-Optik Intra Oral Scanner by Shining 3D- Unique Dental Supply Inc.

Otoflash G171-2 : Flash-curing device for light-curing By NK-Optik

SKU: 18863
Regular price $3,899.99
/

High-power flash-curing machine. Flash-curing device for rapid and
reliable curing of light-curable resins.

Compatible Resins:

KeyModel Ultra – 2000 flashes per side
KeyModel  – 4000 flashes per side
KeyOrthoModel  – 4000 flashes per side
KeyCast – 2000 flashes per side
KeyMask – 4000 flashes per side
KeyGuide  – 2000 flashes per side
KeyTray – 2000 flashes per side
KeySplint Soft  – 2000 flashes per side

Free Shipping on all orders over $150 in Ontario and Quebec. Free Shipping at the rest of the provinces on all orders over $300. (Excluding Extra Heavy items)

Learn more here

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Flash-curing device for light-curing

Flash-curing device for rapid and reliable curing of light curable resins

  • The Otoflash G171-2 is used for curing of light-curable resins through light induced photopolymerization. 
  • In the operating mode, two flash bulbs fitted at the bottom produce ten flashes per second. 

The Otoflash G171-2 has two flashbulbs that emit light into the polymerisation chamber from below. It is therefore especially suitable for application in otoplastics/hearing aids and in the production of jewellery. The device can be used for the photopolymerisation of all light-curable materials where the curing takes place at a wavelength of 280-580 nm.

Spectral range

Similarly, work pieces produced by means of new technologies such as 3D rapid manufacturing can be post-cured. The Otoflash G171-2 enables the production and processing of light curing materials of different consistencies and pigmentation, as well as repairs with corresponding materials and lacquering.

With its technical configuration, the Otoflash G171-2 enables short curing times: In the operating mode, two flash bulbs fitted at the bottom produce ten flashes per second. The respective light radiation at a wavelength of 280-580 nm is very intense. Compared to other methods this achieves a substantially better curing of the materials, resulting in very good physical characteristics and reduced residual monomer content (inhibition layer).

The Otoflash G171-2 is also deliverable with a protective gas appliance (r N2). This prevents any oxygen inhibition, surfaces are cured completely non-stick and there is no need to remove or wipe away the inhibition layer.

The Otoflash G171-2 has an integrated elapsed time meter, is simple to use and is extremely easy to maintain.

The Otoflash G171-2 are adjustable to different operational voltages (USA: 117 volt/60 Hz and Japan: 100 volt/60Hz).

TECHNICAL SPECIFICATIONS

Dimensions of polymerisation chamber: 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 w
Capacity: 4 BTE-aids or 6 ITE-aids
Rated voltage: 100, 117, 230 volt AC, adjustable by switch
Rated frequency: 50/60 Hz
Power input: 250 watt
Spectral distribution: 280-700 nm, maximum between 400 and 500 nm
Average flash power: 200 watt
Flash frequency: 10 flashes per second
Digital timer: adjustable from 1 to 9.999 flashes
Dimensions: 310 x 310 x 140 mm
Weight: 6 kg